LINK BELT KLFS2E20 Flange Block Bearings

Category:Single Row Ball Bear; Mass:0.11 kg; Db min:53.5 mm; Snap Ring:Yes; b min:1.35 mm; a min:2.31 mm; Snap ring reference:R47; da min:25 mm; Maximum Capacity / Filling Slot:No; B:14 mm;

Aa - Cage-Cone Backface Clearance:0.06 in; B - Cone Width:1.4375 in; d:5 in; da - Cone Frontface Backing Diameter:5.31 in; Design Units:Imperial; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:6750 lbf; C90 - Dynamic Radial Rating (90 million revolutions)5:12800 lbf; C90(2) - Dynamic Radial

Cylinder shape (suffix symbol: X):No; Inner/Outer Ring Material:Steel; Rolling Element Material:Steel; Holder Symbol:No; High-Speed Steel:Standard; Format symbol:NUP (equipped with a; Outer ring oil hole:Standard; Rolling Element Material:Steel; Raceway Ring Shape:Cylindrical Roller; d:55;

Brand:NTN; Mass:0.24 kg; Min operating temperature, Tmin:-40 °C; C:23 mm; D:90 mm; Max operating temperature, Tmax:120 °C; r1a max:2.5 mm;

G1:M16; L3:38 mm; B1:28.6 mm; C:9.55 kN; SW:3 mm; A5:12.6 mm; A:25 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of housing:EHE203-; d1:27.2 mm;

Weight:0.62 kg; L:128.6 mm; B:32 mm; Recommended tightening torque for set screw:5.5 Nm; N:11mm; H1:4.4 mm; Designation of housing:PP207-; S:8.5 mm; d:35 mm; T max.:100 °C;

Dynamic load, C:0.4 kN; Nlim (oil):61,000 rpm; Nlim (grease):52,000 rpm; Da max:4 mm; Radial clearance class:CN; Static load, C0:0.14 kN; da min:8 mm; D:8 mm; B:3 mm; f0:13.9;

Housing Material:1045 Carbon Steel; Width T(mm):150; Bearing Used:Angular Contact Bear; Bearing Retained:No; Type:Angular Contact Bear; Number of Bearings:Double; Number of Bearings:Double; Bearing I.D. d(mm):30; Days to Ship:12 Days or more; Bearing Retained:No;

Weight:0.64 kg; J1:51 mm; A1:14 mm; s1:30.9 mm; A:27 mm; Recommended tightening torque for set screw:3.7 Nm; A2:42.9 mm; L:68 mm; e:16 mm; L1:65 mm;

Bearing Inner Dia. Shape:Cylindrical Bore Set; Accessory:No Cover; Bearing Inner Dia. Shape:Cylindrical Bore Set; Temperature Properties:Standard; Fit:J7; Rolling Element Material:Bearing Steel; d:25; Diameter series symbol:For Heavy Load; Basic Load Rating, Dynamic Rating(N):21200; Surface Treatmen

Weight:2.24 kg; L:120 mm; S:19 mm; H1:20 mm; J:85 mm; H2:106 mm; T min.:-40 °C; Designation of housing:PG209-; A:54 mm; H:53.9 mm;

Seals:VV (Non-Contact Rubb; Flange O.D. H(φ):114; Volume Discount:Available; Housing Material:1045 Carbon Steel; Volume Discount:Available; Bearing Part Number:6008; RoHS:6; Shape:Flanged Pilot Type; Holder Surface Treatment:Electroless Nickel P; Type:Bearings with Housin;

Holder Surface Treatment:Electroless Nickel P; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing I.D. d(mm):25; Seals:ZZ (Double Shield); Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; RoHS:6; Bearing Retained:Yes (with retaining; Shape:Flange Type;

B:19 mm; A:34 mm; A4:26 mm; T max.:100 °C; B1:34 mm; L:135 mm; N:14mm; A1:9 mm; Designation of bearing:LK207G2H; Designation of housing:FC207N-;

Cup Part Number:71750; C - Cup Width:1.3750 in; Design Units:Imperial; Cg - Geometry Factor:0.116; r - Cup Backface To Clear Radius1:0.130 in; D:7.5 in; Y - ISO Factor3:1.44; Db - Cup Backface Backing Diameter:6.73 in; Series:71000; Da - Cup Frontface Backing Diameter:7.17 in;