AMI UENST204-12NPMZ20 Mounted Units & Inserts

Lock nut:AN 17; Threads per inch:12; B1:83.871 mm; B4:17.704 mm; Lock washer:W 17; Hydraulic nut:HMVC 17E; d3 max.:112.039 mm; d1:76.2 mm; d:85 mm; Sleeve:S 117x3;

B1:10 mm; d1 ≈:188 mm; Mass angle ring:0.72 kg; d:160 mm; B2:19 mm; r3,4 min.:1.5 mm;

s1:32.6 mm; B:51.6 mm; Db1:107 mm; Housing:FYTB 510 M/VZ033; L:116 mm; Thread grub screw G2:1/4-28 UNF; H:189 mm; RG:1/4-28 UNF; N:18 mm; Recommended diameter for attachment bolts, inch G:0.625 in;

D1 ≈:103 mm; r1,2 min.:1.1 mm; R:112 mm; da min.:130 mm; Limiting speed:2400 r/min; Basic static load rating C0:325 kN; Reference speed:1700 r/min; C:14 mm; Mass bearing (including seat washer where applicable):2.7 kg; d1 ≈:150 mm;

A1:98.425 mm; P180°:49.8 kN; da:79.375 mm; P150°:40.5 kN; H2:41.275 mm; Initial grease fill:286.33 g; ba:34.925 mm; J min.:260.35 mm; L:349.25 mm; Cap bolt, SAE grade:5;

H2:85.725 mm; h:62.706 mm; PosiTrac Plus contact element:2 x B10724-159; Pa:58.7 kN; N1:34.925 mm; P150°:120 kN; P180°:145 kN; ba:83.344 mm; A1:203.2 mm; S:4.763 mm;

rs:1 mm; Oil:18 000 min-1; d:20 mm; D:47 mm; B:20.6 mm; da:25 min; Grease:15 000 min-1; Da:42 max; Dynamic (Cr):12.774 kN; Pu:0.298 kN;

d3 max.:279.527 mm; d:220 mm; G:219.151 mm; Lock washer:W 44; Hydraulic nut:HMVC 44E; Threads per inch:8; d1:190.5 mm; B4:35.712 mm; B1:149.631 mm; Sleeve:S 44x7.1/2;

Fillet Radius rb:1.00 mm; Oil Speed Rating n2:1600 rpm; Basic Static Radial Load Rating 15 B Bearing Co2:640000 N; Angle Third:40 º; Basic Dynamic Radial Load Rating 15 B Bearing C2:475000 N; Grease Speed Rating n1:1300 rpm; B:225.00 mm; Fillet Radius ra:3.00 mm; D:380.0000 mm; Basic Dynamic Ra

D:175.0000 mm; Accessories:One Shield; Grease Speed Rating Open/Shielded n1:3400 rpm; d:140.000 mm; Sealed Speed Rating n3:2000 rpm; B:18.00 mm; Basic Dynamic Radial Load Rating C:39000 N; Basic Static Radial Load Rating Co:46500 N; Oil Speed Rating Open/Shielded n2:4000 rpm; Fillet Radius ra:1.00 m

Accessories:Without Accessories; D:90.0000 mm; Grease Speed Rating Open/Shielded n1:7500 rpm; Basic Dynamic Radial Load Rating C:28100 N; d:55.000 mm; B:18.00 mm; Oil Speed Rating Open/Shielded n2:9000 rpm; Sealed Speed Rating n3:4500 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co

d:20.000 mm; Basic Static Radial Load Rating Co:2240 N; Sealed Speed Rating n3:13000 rpm; Fillet Radius ra:0.30 mm; B:7.00 mm; Basic Dynamic Radial Load Rating C:3510 N; Accessories:Without Accessories; Grease Speed Rating Open/Shielded n1:19000 rpm; Oil Speed Rating Open/Shielded n2:24000 rpm; D:32

H max.:157.445 mm; b:13 mm; B:168 mm; D:520 mm; K:10 mm; Fatigue load limit Pu:270 kN; E:356 mm; Maximum dynamic radial loads Fr max.:1900 kN; Basic dynamic load rating C:2090 kN; C:168 mm;

dk:66 mm; Specific dynamic load factor K:150 N/mm²; l7 min.:58 mm; Material constant KM:330; G:M 45x3; h:185 mm; l1 min.:104 mm; α:6 °; d2 max.:114 mm; l2 max.:244 mm;

Accessories:Two Seals; d:30.000 mm; Oil Speed Rating n2:9500 rpm; D:62.0000 mm; Basic Static Radial Load Rating Co:28000 N; Grease Speed Rating n1:7000 rpm; B:27.00 mm; Basic Dynamic Radial Load Rating C:30300 N; Sealed Speed Rating n3:7000 rpm; Fillet Radius ra:1.00 mm;